$2.13 USD · R31.95 ZAR
Force de Traction: 23 kg
Poids: 0.1 kg
The D25 Pot Magnet - 23kg Pull is a professional-grade magnet rated at 23 kg pull force, designed for commercial and industrial applications. Built with marine-grade materials for reliable performance in harsh environments.
Best for light-duty and inspection work
The D25 Pot Magnet - 23kg Pull is rated at 23 kg on a clean, flat, mild steel surface. Underwater, real-world pull force depends on surface condition (rust, paint, marine growth), surface thickness, and contact angle. Expect 50–80% of rated pull on typical subsea steel structures. Always use a 2–3× safety factor for dynamic loads.
With proper care — rinsing with fresh water after each use and drying before storage — the Epoxy-HDPE coating protects the neodymium core for 4+ years of regular commercial diving use. The 316 stainless steel hardware is highly resistant to saltwater corrosion. Avoid dropping the magnet on hard surfaces, as impact damage to the coating is the primary cause of premature corrosion.
Yes. The D25 Pot Magnet - 23kg Pull at 23 kg pull force is designed for light-duty commercial work including inspections, surveys, and small tool holding. If you regularly work with heavier tools or in strong currents, consider stepping up to a higher-rated model.
The D25 Pot Magnet - 23kg Pull works on any ferromagnetic surface — mild steel, carbon steel, cast iron, and structural steel provide the best results. Performance is reduced on rusty, painted, or curved surfaces. It will not work on aluminium, brass, copper, most stainless steels (304/316), concrete, wood, or plastic.
No. The D25 Pot Magnet - 23kg Pull is designed for horizontal tool holding and equipment staging — not for vertical lifting or rigging. It is not certified lifting gear. For safety-critical applications, always use rated lifting equipment. The magnet is a positioning and holding tool, not a load-bearing device.
D'autres questions ? Visitez notre page FAQ complète · comparer tous les modèles.
$26.49 USD · R397.35 ZAR
130 kg pull force
$11.76 USD · R176.4 ZAR
92 kg pull force
$6.90 USD · R103.5 ZAR
77 kg pull force
$3.69 USD · R55.35 ZAR
45 kg pull force