D48 Pot Magnet - 92 Kg Pull
$11.76 USD · R176.4 ZAR
Haltekraft: 92 kg
Gewicht: 0.15 kg
The D48 Pot Magnet - 92 Kg Pull is a professional-grade magnet rated at 92 kg pull force, designed for commercial and industrial applications. Built with marine-grade materials for reliable performance in harsh environments.
The DM-PM-48 Pot Magnet is a compact yet powerful clamping magnet designed to deliver exceptional holding strength for its size. Combining the performance of Neodymium (NdFeB N42) with the practicality of an M8 eye nut, it provides a secure attachment point for lifting, securing, or positioning equipment on steel surfaces.
With a 48 mm diameter magnetic face, the magnet can support up to 92 kg vertically when in flush contact with a mild steel surface of equal thickness. The neodymium magnet is encased within a steel pot, concentrating the magnetic field to significantly increase the holding force relative to its size. A Teflon coating enhances durability and corrosion resistance in demanding environments.
Specifications:
Product Code: DM-PM-48 | Magnet type: Neodymium (NdFeB N42) | Coating: Teflon | Diameter: 48 mm | Thickness: 11.5 mm | Fixing: M8 eye nut with 8 mm counterbored hole | Maximum holding force: up to 92 kg (vertical pull) | Max operating temperature: 80°C.
Häufig gestellte Fragen
What is the actual pull force of the D48 Pot Magnet - 92 Kg Pull underwater?
The D48 Pot Magnet - 92 Kg Pull is rated at 92 kg on a clean, flat, mild steel surface. Underwater, real-world pull force depends on surface condition (rust, paint, marine growth), surface thickness, and contact angle. Expect 50–80% of rated pull on typical subsea steel structures. Always use a 2–3× safety factor for dynamic loads.
How long will the D48 Pot Magnet - 92 Kg Pull last in saltwater?
With proper care — rinsing with fresh water after each use and drying before storage — the Epoxy-HDPE coating protects the neodymium core for 4+ years of regular commercial diving use. The 316 stainless steel hardware is highly resistant to saltwater corrosion. Avoid dropping the magnet on hard surfaces, as impact damage to the coating is the primary cause of premature corrosion.
Is the D48 Pot Magnet - 92 Kg Pull strong enough for commercial diving?
Yes. The D48 Pot Magnet - 92 Kg Pull at 92 kg pull force is designed for light-duty commercial work including inspections, surveys, and small tool holding. If you regularly work with heavier tools or in strong currents, consider stepping up to a higher-rated model.
What surfaces does the D48 Pot Magnet - 92 Kg Pull work on?
The D48 Pot Magnet - 92 Kg Pull works on any ferromagnetic surface — mild steel, carbon steel, cast iron, and structural steel provide the best results. Performance is reduced on rusty, painted, or curved surfaces. It will not work on aluminium, brass, copper, most stainless steels (304/316), concrete, wood, or plastic.
Can I use the D48 Pot Magnet - 92 Kg Pull for lifting?
No. The D48 Pot Magnet - 92 Kg Pull is designed for horizontal tool holding and equipment staging — not for vertical lifting or rigging. It is not certified lifting gear. For safety-critical applications, always use rated lifting equipment. The magnet is a positioning and holding tool, not a load-bearing device.
Weitere Fragen? Besuchen Sie unsere ausführliche FAQ-Seite · alle Modelle vergleichen.
