Diver Magnet - 230
Imán doble: dos imanes de Ø60 bajo una sola asa, para mayor resistencia al deslizamiento sobre acero curvo o irregular. ¿Necesita la máxima sujeción de un solo imán? Vea el Diver Magnet – 250.
El Diver Magnet – 230 es un imán submarino de alto rendimiento, diseñado para operaciones de buceo comercial de carga media a pesada. Proporciona una fuerza de sujeción sólida y fiable sobre estructuras ferrosas, ayudando a los buzos a mantener la estabilidad mientras trabajan con herramientas, realizan tareas de mantenimiento u operan en corrientes moderadas. El conjunto incluye dos imanes de copa de neodimio Ø60 de alta resistencia para una adhesión segura, una tuerca de argolla de acero inoxidable para fijar herramientas y cabos de anclaje, y un asa de acero inoxidable que proporciona un agarre firme y un apalancamiento controlado para un desprendimiento seguro una vez que el imán está completamente acoplado. Duradero y resistente a la corrosión, el Diver Magnet – 230 está construido para ofrecer un rendimiento fiable en entornos submarinos exigentes.
Fuerza de sujeción: 230 kg · Cara magnética Ø: 2 × 60 mm · Grado: N42 · Recubrimiento: Epoxy-HDPE · Profundidad: probado en servicio hasta 150 m · País de origen: Sudáfrica
The Diver Magnet - 230 is a professional-grade neodymium pot magnet rated at 230 kg pull force — the go-to choice for commercial divers who need reliable tool anchoring, equipment staging, and general subsea operations. Manufactured by Diving Magnets (Pty) Ltd in South Africa with Epoxy-HDPE coating for corrosion resistance and 316 stainless steel hardware, this diver magnet is trusted by commercial diving professionals worldwide.
¿Para qué se usa el Diver Magnet - 230 ?
- General commercial diving tool holding on pipelines and structures
- Underwater inspection and NDT (Non-Destructive Testing) equipment staging
- Securing medium-weight tools during hull cleaning and maintenance
- Subsea welding habitat setup and equipment positioning
- Offshore platform maintenance and repair operations
Características y ventajas
- 230 kg rated pull force — reliable for most commercial diving tool holding applications
- Magnet sealed in epoxy and HDPE for continuous saltwater use
- 316 stainless steel eye nut and handle hardware — highly corrosion-resistant in marine environments
- Controlled detachment mechanism prevents accidental release during operations
¿En qué superficies funciona el Diver Magnet - 230 ?
Funciona mejor en
- Mild steel and carbon steel (best performance — flat, clean surfaces)
- Cast iron structures and components
- Structural steel beams, columns, and plate
- Steel pipelines and risers
- Ship hulls and marine vessel steel
Reduce el rendimiento
- Rusted or corroded surfaces — rust and scale create an air gap that reduces pull force
- Painted or coated surfaces — coating thickness creates an air gap
- Curved surfaces — reduced contact area lowers effective pull
- Thin metal (under 5 mm) — insufficient material for full flux path
No funcionará en
- Aluminium, brass, copper, and bronze (non-ferrous metals)
- Most austenitic stainless steels (304, 316) — little or no attraction, slightly magnetic only where cold-worked or welded
- Concrete, wood, plastic, fibreglass, and composites
- Titanium and non-magnetic alloys
Pautas de seguridad
- Always wear protective gloves when handling magnets rated above 100 kg pull force — pinch injuries are the most common hazard
- Keep magnets away from dive computers, compasses, and electronic instruments — strong magnetic fields can cause permanent damage
- Never allow two magnets to snap together uncontrolled — the collision force can shatter the magnet and cause flying debris
- Use a safety lanyard to secure the magnet to your harness — prevents loss in current or during detachment
- Attach at a 45° angle and rotate flat — never approach a steel surface head-on with a strong magnet
- Brief your dive team on magnet location — unexpected strong pull near steel structures can trap equipment or limbs
Cuidado y mantenimiento
- Rinse thoroughly with fresh water after every saltwater use — salt crystals accelerate corrosion if left on the coating
- Dry completely before storage — moisture trapped against the magnet surface causes coating breakdown over time
- Inspect the Epoxy-HDPE coating regularly — any chips or cracks expose the neodymium core to corrosion
- Remove iron filings and metal particles after each use with a wire brush or cloth — accumulated debris reduces pull force
- Store in a cool, dry environment away from electronic equipment — temperatures above 80°C permanently reduce magnetic strength
- Apply a thin layer of corrosion inhibitor (light oil or silicone spray) for long-term storage
The all-rounder for professional commercial diving
- Working commercial divers who need a reliable daily-use magnet
- Dive companies outfitting teams for general offshore maintenance work
- Operations requiring 230 kg pull force for medium-weight tools and equipment
- Inspection and NDT teams who need dependable staging on steel structures
- The most popular choice among professional dive teams worldwide
Preguntas frecuentes — Diver Magnet - 230
Productos relacionados
¿No está seguro de si este es el modelo correcto?
Compare todos los modelos uno al lado del otro o lea nuestras preguntas frecuentes.
Opiniones de clientes
Aún no hay opiniones de este producto.
Las opiniones proceden solo de compradores verificados. Invitamos a cada cliente una sola vez tras la entrega. Publicamos tanto las positivas como las negativas, y ninguna es remunerada. Solo retiramos spam o contenido ofensivo. Lea nuestra política de moderación de opiniones