Diver Magnet - 115
Der Diver Magnet – 115 ist ein kompakter Unterwassermagnet für leichte Aufgaben im Berufstauchen wie Inspektionen und Rumpfbesichtigungen an Schiffen wie FPSOs und FSOs sowie an Offshore-Anlagen wie SBMs. Er ist ideal, wenn nur grundlegende Inspektionsausrüstung am Taucher befestigt ist und häufiges Umsetzen zwischen Arbeitsbereichen erforderlich ist, beispielsweise bei Schweißnahtinspektionen. Die Baugruppe verfügt über einen starken Neodym-Topfmagneten für sicheren Halt auf ferromagnetischen Oberflächen, eine Ringmutter aus Edelstahl zum Befestigen von Werkzeugen und Verbindungsmitteln sowie einen Edelstahlgriff, der festen Halt und eine kontrollierte Hebelwirkung zum sicheren Lösen bietet, sobald der Magnet vollständig haftet. Robust und korrosionsbeständig liefert der Diver Magnet – 115 zuverlässige Leistung in anspruchsvollen Unterwasserumgebungen.
Haftkraft: 115 kg · Haftfläche Ø: 60 mm · Magnetgüte: N42 · Beschichtung: Epoxy-HDPE · Tiefe: im Einsatz bewährt bis 150 m · Herkunftsland: Südafrika
The Diver Magnet - 115 is a compact, lightweight neodymium pot magnet rated at 115 kg pull force — ideal for light-duty tool holding, inspection tasks, and confined-space subsea work where portability matters. Manufactured by Diving Magnets (Pty) Ltd in South Africa with Epoxy-HDPE coating for corrosion resistance and 316 stainless steel hardware, this diver magnet is trusted by commercial diving professionals worldwide.
Wofür wird der Diver Magnet - 115 verwendet?
- Holding small hand tools (scrapers, wire brushes, measuring tapes) on steel structures underwater
- Hull inspection and marine survey work in confined spaces
- Light-duty subsea positioning for cameras and sensors
- Diver staging point for personal equipment during short tasks
- Cathodic protection survey work on offshore platforms
Funktionen & Vorteile
- 115 kg neodymium pot magnet — compact and lightweight for confined-space work
- Magnet sealed in epoxy and HDPE for continuous saltwater use
- 316 stainless steel eye nut and handle hardware — highly corrosion-resistant in marine environments
- Single-hand controlled detachment for safe underwater tool management
- Safety lanyard attachment point for tethered operation
Auf welchen Oberflächen funktioniert der Diver Magnet - 115 ?
Funktioniert am besten auf
- Mild steel and carbon steel (best performance — flat, clean surfaces)
- Cast iron structures and components
- Structural steel beams, columns, and plate
- Steel pipelines and risers
- Ship hulls and marine vessel steel
Reduziert die Leistung
- Rusted or corroded surfaces — rust and scale create an air gap that reduces pull force
- Painted or coated surfaces — coating thickness creates an air gap
- Curved surfaces — reduced contact area lowers effective pull
- Thin metal (under 5 mm) — insufficient material for full flux path
Funktioniert nicht auf
- Aluminium, brass, copper, and bronze (non-ferrous metals)
- Most austenitic stainless steels (304, 316) — little or no attraction, slightly magnetic only where cold-worked or welded
- Concrete, wood, plastic, fibreglass, and composites
- Titanium and non-magnetic alloys
Sicherheitsrichtlinien
- Always wear protective gloves when handling magnets rated above 100 kg pull force — pinch injuries are the most common hazard
- Keep magnets away from dive computers, compasses, and electronic instruments — strong magnetic fields can cause permanent damage
- Never allow two magnets to snap together uncontrolled — the collision force can shatter the magnet and cause flying debris
- Use a safety lanyard to secure the magnet to your harness — prevents loss in current or during detachment
- Attach at a 45° angle and rotate flat — never approach a steel surface head-on with a strong magnet
- Brief your dive team on magnet location — unexpected strong pull near steel structures can trap equipment or limbs
Pflege & Wartung
- Rinse thoroughly with fresh water after every saltwater use — salt crystals accelerate corrosion if left on the coating
- Dry completely before storage — moisture trapped against the magnet surface causes coating breakdown over time
- Inspect the Epoxy-HDPE coating regularly — any chips or cracks expose the neodymium core to corrosion
- Remove iron filings and metal particles after each use with a wire brush or cloth — accumulated debris reduces pull force
- Store in a cool, dry environment away from electronic equipment — temperatures above 80°C permanently reduce magnetic strength
- Apply a thin layer of corrosion inhibitor (light oil or silicone spray) for long-term storage
Best for light-duty and inspection work
- Commercial divers doing hull inspections, cathodic protection surveys, or confined-space work
- Dive teams that need a compact, portable magnet for small tools
- Operators who work on lighter structures where 115 kg pull force is sufficient
- Divers who prioritise low weight and easy handling over maximum holding power
- A good entry-level choice for divers new to magnetic tool holding
Häufig gestellte Fragen — Diver Magnet - 115
Ähnliche Produkte
Unsicher, ob dies das richtige Modell ist?
Vergleichen Sie alle Modelle nebeneinander oder lesen Sie unsere FAQ.