What is the actual pull force of the Diver Magnet - 200 underwater?

The Diver Magnet - 200 is rated at 200 kg on a clean, flat, mild steel surface. Underwater, real-world pull force depends on surface condition (rust, paint, marine growth), surface thickness, and contact angle. Expect 50–80% of rated pull on typical subsea steel structures. Always use a 2–3× safety factor for dynamic loads.

How long will the Diver Magnet - 200 last in saltwater?

With proper care — rinsing with fresh water after each use and drying before storage — the Epoxy-HDPE coating protects the neodymium core for 4+ years of regular commercial diving use. The 316 stainless steel hardware is highly resistant to saltwater corrosion. Avoid dropping the magnet on hard surfaces, as impact damage to the coating is the primary cause of premature corrosion.

Is the Diver Magnet - 200 strong enough for commercial diving?

Yes. The Diver Magnet - 200 at 200 kg pull force is one of the most popular models among professional divers for general tool holding and equipment staging. If you regularly work with heavier tools or in strong currents, consider stepping up to a higher-rated model.

What surfaces does the Diver Magnet - 200 work on?

The Diver Magnet - 200 works on any ferromagnetic surface — mild steel, carbon steel, cast iron, and structural steel provide the best results. Performance is reduced on rusty, painted, or curved surfaces. It will not work on aluminium, brass, copper, most stainless steels (304/316), concrete, wood, or plastic.

Can I use the Diver Magnet - 200 for lifting?

No. The Diver Magnet - 200 is designed for horizontal tool holding and equipment staging — not for vertical lifting or rigging. It is not certified lifting gear. For safety-critical applications, always use rated lifting equipment. The magnet is a positioning and holding tool, not a load-bearing device.

Diver Magnet - 200

Name: Diver Magnet - 200
Brand: Diving Magnets
SKU: diver-magnet-200
Price: 1760 ZAR
Availability: InStock

$121.00 USD · R1760 ZAR

Trekkraft: 200 kg

Vekt: 0.9 kg

The Diver Magnet - 200 is a professional-grade neodymium pot magnet rated at 200 kg pull force — the go-to choice for commercial divers who need reliable tool anchoring, equipment staging, and general subsea operations. Manufactured by Diving Magnets (Pty) Ltd in South Africa with Epoxy-HDPE coating for corrosion resistance and 316 stainless steel hardware, this diver magnet is trusted by commercial diving professionals worldwide.

The Diver Magnet – 200 is a powerful and compact subsea magnet designed for everyday commercial diving operations. Built around a high-strength neodymium pot magnet, it provides a secure hold on ferrous structures, helping divers maintain stability while performing inspections, maintenance, or operating hand tools. The assembly features a stainless steel eye nut for attaching tools and lanyards, and a stainless steel handle for secure handling and controlled detachment. Durable, corrosion-resistant, and purpose-built for subsea environments, the Diver Magnet – 200 delivers dependable holding power where reliability matters most.