Diver Magnets
Not sure which model? Compare all models or see our FAQ.
How to choose
Every Diver Magnet has a neodymium core sealed in Epoxy-HDPE inside a plated steel pot. They come in four builds: one or two magnets, each Ø60 mm or Ø78 mm.
| Build | Models | Rated pull force | Typical use |
|---|---|---|---|
| 1 × Ø60 mm | DM-115, DM-140 | 115–140 kg | Hull surveys, inspection, light maintenance |
| 1 × Ø78 mm | DM-160, DM-200, DM-250 | 160–250 kg | Standard commercial work: pipeline, hull cleaning, welding, UWILD |
| 2 × Ø60 mm (twin) | DM-230, DM-280 | 230–280 kg | Standard commercial work |
| 2 × Ø78 mm (twin) | DM-320, DM-400, DM-500 | 320–500 kg | Holding position in strong currents, extended work on large steel structures, tool staging |
Single or twin: a single magnet is the compact option: 170–179 mm long. A twin puts two magnets on one handle and is longer (235.5–289 mm), with more pull force for the same magnet size.
Size for real conditions: choose a magnet whose rated pull force is at least 2–3× the holding load you need. Go higher for dynamic, angled or vibrating loads. Rated pull is measured on clean, flat steel. Paint, rust, marine growth, curved surfaces and side loading all reduce it.
Diving magnets are positioning and holding tools, not lifting equipment.
Read the full guide: How to choose the right diving magnet for commercial diving · Technical specs